)
The main PROFILER 2TM screen displays the Y & X axes simultaneously. The Y axis is a 328 mm sagittal cross section and the X axis is a 224 mm axial cross section of the beam output.
)
The main PROFILER 2 screen may also be used to view only the 328 cm Y axis. In any screen the user may adjust the background tint, in this view a grey tint is used.
)
PROFILER 2 gives several options for comparing and overlaying different profiles. You can simply overlay two profiles in total dose mode, you can normalize any two profiles to any point on the profile, and you can zoom in to scrutinize differences between any two profiles.
)
The PROFILER 2 will import the treatment planning file from a TPS and perform comparisons of the planned and measured dose. An intuitive PROFILER 2 array floats above the TPS map and extracts planned data. Once a measurement orientation is chosen, the PROFILER 2 will give precise setup instructions. This is a quick and precise method of performing PROFILER 2 to TPS comparisons.
)
PROFILER 2 makes it easy to quickly compare two different profiles for percent difference. Simply select the two profiles from the open profile list, and select “Compare.”
)
Header information is comprehensive and allows all critical settings to be recorded with the profile data.