- Home
- Software
- Specificatons
- FAQ's
- Service
The Information Setup Screen
The 1028 Main Information setup screenOn the main screen inspection page, download test results by clicking on the “retrieve data from monitor” button. View battery voltage, time and date, calibration and correction factor information. Prior to printing test results, complete customer address information and add images to your report.
Chart Detail Screen
Chart Detail ScreenView the chart details and check select boxes located at the bottom to add or delete radon intervals, motion detection or Temperature, Barometric Pressure and Humidity information displayed on the chart.
1028 Preferences Screen
The 1028 Preferences screenUpon initial monitor setup, the parameters page contains the inspection company details and allows for time and date changes along with selectable Pico Curie or Becquerel settings. A default PIN code 1111 can be changed to a four digit custom code to prevent others from reading or tampering during the test process. For Inspection Company set up, follow steps 1 through 3 and click ok when completed. The radon monitor should be clear of any test data and the display should show Start Test = 5 to allow changes.
Print Customized Reports
Print Customized ReportsPrint customized reports in PDF format to allow for viewing from websites or emailing to clients. If PDF is not appropriate, files can be copied to the clip board to paste in Word or Excel.
- Power Supply: Operates on 12 VDC supplied by external power adapter universal to 110-230 VAC, 200 mA Internal 9 volt alkaline battery provides100 + hours of operation
- Sensitivity: 2.5 cph/pCi/l
- Radiation Detector: One Diffused Junction Photodiode
- Cables: Power cord- standard 6 foot, 3 conductor cable with 3 prong wall plug, USB cable-standard 6 foot, USB connector “a” and USB connector “b”
- Construction:
Dimension: 4.62 in wide, 8.22 in long 3.92 in high
Weight: Approx. 3 lbs - Computer System Requirement:
Computer: Minimum Pentium,1 free USB port
Operating System: Windows 95 or Higher
Firmware: Factory installed in flash memory
- Measurement Ranges:
0.1 to 999.9 pCi/l
1000 to 9999 pCi/l
1 to 9999 Bq/m3
10.00 to 99.99 kBq/m3 - Measurement Accuracy: ± 25% or 1 pCi/l, whichever is greater after 24 hours
- Measurement Intervals: 1, 2, 4, 8, 12, 16, 20, 24 hours
- Operating Environment:
45 to 95 degrees F
0 to 90% relative humidity - Weight: 2 lbs.
- Size: 8" * 4.7" * 2.5"
- User Interface:
Control Panel: 16 character LCD with a low power reflective display with .3” character height
Keypad: 6 momentary switches provided in a sealed membrane overlay
Q: How long should a test for radon take?
A: A short term test is 48 hours up to 90 days. A long term test is 90 days or more.
Q: What is an acceptable level of radon for a home?
A: The lowest acceptable level of radon is less than 4 pCi/l per industry standards and the EPA.
Q: Who can test for radon?
A: All radon testers and devices should be approved by a state or national proficiency program.
Q: Where can I find more information about radon testing and certification?
A: Contact a state agency or national proficiency program for educational training and certifications.
A: A short term test is 48 hours up to 90 days. A long term test is 90 days or more.
Q: What is an acceptable level of radon for a home?
A: The lowest acceptable level of radon is less than 4 pCi/l per industry standards and the EPA.
Q: Who can test for radon?
A: All radon testers and devices should be approved by a state or national proficiency program.
Q: Where can I find more information about radon testing and certification?
A: Contact a state agency or national proficiency program for educational training and certifications.
New Radon Monitors are shipped with factory calibration valid for one year.
Radon Monitors should be returned annually for a new calibration.
| Warranty Periods | |
| Monitor warranty period | 1 Year from date of purchase |
| Printer warranty period | 90 Days from date of purchase |
| Calibration warranty period | 90 Days from date of purchase |
| Warranty Service (Unit Prices) | |
| Customer must provide proof of purchase and pay shipping charges to the factory. | |
| Repair within warranty period (includes calibration if required) | No Charge |
| Model 1027 Non-Warranty Service (Unit Prices) | |
| All service to the monitors (repair/calibration) | $130.00 |
| All service to printers | $180.00 |
| Accessory Items (Unit Prices) | |
| Power Adapter (p/n 700050 for Model 1027) | $16.00 |
| Power Adapter (p/n 700031 for all other models) | $16.00 |
| battery (each) (p/n 750004) 9v | $3.00 |
| Printer Ribbon (p/n 850013) | $11.00 |
| Single Radon Monitor case (p/n 102735 for model 1027) | $45.00 |
| Printer power adapter (p/n 700039) | $30.00 |
| USB Adapter cable (p/n 850029) | $45.00 |
| Carrying Case (p/n: 102735) | $45.00 |
| Printer Spindle (p/n 850035) | $5.00 |
Unit Prices DO NOT Include Shipping Cost.
Sun Nuclear Model 1022, 1023, 1024, and 1026 Radon Monitors are no longer supported by Sun Nuclear due to the age of these instruments and the difficulty in obtaining parts for repair. You may contact Bowser Morner to inquire about service possibilities for these monitors. We apologize for any inconvenience.
Bowser-Morner, Inc.
Services: Calibration
4518 Taylorsville Road
Dayton, OH 45424
Tel: 937-236-8805
